High purity hydrogen making machine 99.999%

High purity hydrogen making machine 99.999%

Product introduction

The main automatic control schemes commonly used in hydrogen production plants are as follows:

Water/carbon ratio and raw material load control;

Three impulse control of drum liquid level;

Cascade control of converter outlet temperature and fuel gas flow rate;

Temperature monitoring and control of medium temperature transformer gas;

Temperature control from the central transformer gas to the PSA device;

Pressure control from central transformer gas to PSA device;

Pressure split control of product hydrogen outlet device;

Install combustible gas concentration measurement transmitters in areas where flammable gases may leak or accumulate, and concentrate them in the control room for indication and alarm.

Product parameter

Name: Hydrogen producing reformer

Application: petrochemical industry

Design temperature: 900-1100℃

Megawatt: 5-50 MW/unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1, before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;Hydrogenation Project,Hydrogen Production Eguipment,Heating Furnace Equipment

4, heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.