Excent Quality Steam Boiler Parts Superheater/Reheater

Excent Quality Steam Boiler Parts Superheater/Reheater

Product introduction

Steam superheater is a kind of equipment used to produce high temperature and high pressure steam.Heating Furnace Equipment It is commonly used in power plants and industrial production to provide high-temperature and high-pressure steam that is used to drive turbines or other equipment.

Steam superheater works by heating water above its boiling point, turning it into steam. Hydrogen Production Eguipment The steam is then fed into a superheater, where it is heated to superheat. Superheated steam can provide higher energy density and greater efficiency, thus improving the performance of the device.

Steam superheater usually uses fuel as heat source, such as coal, natural gas, oil, etc. The heat generated by the combustion of the fuel is passed through pipes and heating surfaces in the furnace to the water supply, Hydrogenation Project which is heated into steam. A superheater is usually a set of pipes and heating surfaces that are heated to superheat steam.

Steam superheater has the advantages of high efficiency, reliability and safety, and is widely used in various industrial fields.

Product parameter

Name：Steam superheater

Design temperature：800-1100℃

Megawatt：5-50 MW/ unit

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1, before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4, heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.