Floating head type Fixed tube-sheet U-tube heat exchanger

Floating head type Fixed tube-sheet U-tube Heat Exchanger

Product introduction

U-tube heat exchanger consists of the following components:

1. U-shaped pipe: consists of two pipes bent into a U-shape to transfer heat.

2. Tube plate: Connect the two ends of the U-pipe to support and secure the U-pipe and to transfer fluid into and out of the U-pipe.

3. Shell: Metal shell covering U-shaped tube and tube plate, used to protect and isolate heat source.

4. Insulation layer: The insulating material covering the shell is used to reduce heat loss.

5. Support frame: Used to support and fix the U-tube heat exchanger for easy installation and maintenance.

6. Inlet and outlet pipe: The inlet and outlet pipe connected to the U-tube heat exchanger is used to introduce and discharge the fluid into and out of the U-tube.

7. Leakage detector: used to detect whether there is leakage in the U-tube heat exchanger, so as to deal with it in time.

Product parameter

Working pressure /MPa: -0.1~20

Operating temperature /℃: -40~350

Notes on heat exchanger

1. Clean heat exchanger: Regular cleaning of heat exchanger can maintain its efficient operation. Cleaning, should be careful not to use too strong cleaner or brush, so as not to damage the surface of the heat exchanger.

2. Maintain pipes: Pipes should be inspected regularly to ensure that there are no leaks or clogs. If a problem is found, repair or replace it in time.

3. Control water quality: Water quality is very important for the operation of heat exchanger. Impurities and hard substances in the water will form a scale layer inside the heat exchanger, reducing the heat transfer efficiency. Therefore, the water quality should be checked regularly and necessary measures should be taken to control it.Tubular Heat Exchanger,Efficiency Tubular Heat Exchanger,Tube In Tube Heat Exchanger

4. Control water flow: Water flow is also very important for the heat transfer efficiency of heat exchanger. Too high or too low water flow will affect the performance of heat exchanger. Therefore, the water flow should be adjusted according to the actual situation.

5. Regular inspection: regularly check the operation of the heat exchanger, including temperature, pressure, flow and other parameters. If any exception is found, handle it in time.

6. Safety operation: When operating heat exchanger, attention should be paid to safety. Safety regulations and operating procedures must be followed to avoid accidents.