Air preheater for industrial boiler spare parts

Air preheater for industrial boiler spare parts factory 

Product introduction

Boiler Air Preheater is a kind of equipment that can preheat the air needed for boiler combustion. Its function is to improve the combustion efficiency of fuel, reduce the consumption of fuel, and reduce the pollutants discharged by the boiler. Boiler air preheater is usually installed above or on the side of the boiler flue. Air Preheaters,Enameled Air Preheater,Air Preheater Supply,Boiler Air Preheater Through the heat exchange between the flue gas and the air, the waste heat in the flue gas is transferred to the air, so as to increase the temperature of the air, so as to improve the combustion efficiency of the fuel. The use of boiler air preheater can effectively improve the thermal efficiency of the boiler, reduce fuel consumption and pollutant emission, is a kind of energy saving and environmental protection equipment.

Product parameter

Components of flue gas: CO2, H2O, N2, O2

Flow kg/h: 23652(smoke)/22428(air)

Inlet temperature /℃ : 323(smoke)/20(air)

Outlet temperature /℃ : 150(smoke)/170(air)

Pressure drop /Pa: 700(smoke)/700(air)

Heat load /MW: 1.33

Note:

1. Installation position: The air preheater should be installed in a well-ventilated place, away from flammable materials and high temperature areas.

2. Maintenance: regularly clean the filter and Heat Exchanger of the air preheater to ensure its normal and efficient operation.

3. Temperature control: The air preheater should be controlled according to the actual needs to avoid overheating or undercooling.

4. Safety protection: Air preheater should be equipped with safety protection devices, such as overheating protection, overload protection, etc., to ensure the safe operation of equipment.

5. Use attention: when using air preheater, attention should be paid to avoid pollution and harm to human body and the environment, such as flue gas emission, noise, etc.

6. Maintenance: The maintenance of the air preheater should be carried out by professional personnel, and the equipment should not be dismantled or changed without permission.