Complete production line multifunctional cracking furnace

Complete production line multifunctional cracking furnace

Product introduction

A cracking furnace is a device used to break down large molecular compounds into smaller ones. Heating Furnace Equipment It is commonly used in the petrochemical industry for cracking oil, natural gas and other large molecular compounds into smaller hydrocarbons, such as ethylene, propylene, butene, etc. Hydrogen Production Eguipment These small molecular compounds can be used to make plastics, synthetic rubber, fuel and more. Hydrogenation Project The main working principle of cracking furnace is to heat large molecular compounds to the decomposition point under high temperature and high pressure, so that they can be decomposed into small molecular compounds. Cracking furnace is usually composed of furnace body, heater, reactor and separator.

Product parameter

Name: Cracking furnace

Application: petrochemical industry

Design temperature: 800-1100℃

Megawatt: 550-300kw

Specification：：Cylinder diameter 2-8 meters

The square can be customized in length, width and height

Note:

1. before opening the furnace should be furnace tube, parts, ancillary equipment, process pipelines, instruments and other instruments for a comprehensive inspection, confirm the process is correct, all equipment and parts intact, equipment and pipelines without debris, instruments and instruments flexible and convenient operation, real and accurate data;

2. Steam through the process pipeline and equipment of the furnace system to ensure smooth process flow. When all checks are qualified, the fuel gas line shall be completely replaced with nitrogen and then introduced to the fuel gas line. When fuel gas is introduced, pay attention to the oxygen content of air in the pipe <1%. Before ignition, the content of combustible gas in the fuel gas pipeline is detected, and the ignition operation is carried out after the ignition conditions are met.

3. Use steam stoves in strict accordance with operating rules;

4. Heating, close the steam valve, such as furnace and pressure, must be able to wait for the pressure to zero inch after the pot (box) to take.

Compared with other companies, the advantages of our products are: good thermal insulation effect, high thermal efficiency, good energy saving effect, low smoke exhaust temperature, adjustable dilution ratio, good selectivity, less high boiling substance; Emission standards, small pollution, small footprint.

Product process: blanking, assembly, welding, testing, anti-corrosion, installation, commissioning.